| |
HYUNDAI GEVULDE LASDRADEN VOOR ROESTVAST STAAL
|
Classification
|
| AWS |
A5.22 E308LT1-1/-4 |
|
Description
|
|
SW-308L Cored is a flux cored wire for all position welding to be used with CO₂ or Argon +CO₂ mixed shielding gases. This wire benefits from a fast freezing slag system which assists the operator when welding out of position and performs equally as well when welding in the flat and horizontal position.
|
|
Mechanical properties
|
| Yield strenght Elongation Impact strenght |
590 N/mm2 45% 60 J / -20ºC |
|
Classification
|
| AWS |
A5.22 E308LT1-1/-4 |
|
Description
|
|
SW-308LT is a titania type flux cored wire for all position welding with CO₂ & Argon+CO₂ mixed shielding gas. This wire is designed for cryogenic applications, 304L austenitic stainless steels. The high impact toughness at cryogenic temperature (-196ºc) makes SW-308LT excellent in LNG applications. Arc stability is excellent, so spatter loss is low and slag covering is uniform with good removability.
|
|
Mechanical properties
|
| Tensile strenght Elongation Tensile strenght Impact strenght |
402 N/mm2 49% 550 N/mm2 35 J / -196ºC |
|
Classification
|
| AWS |
A5.22 E309LT1-1/-4 |
|
Description
|
|
SW-309L Cored is a flux cored wire for all position welding to be used with CO₂ or Argon + CO₂ mixed shielding gases. This wire contains a high ferrite level in its austenitic structure thus providing better weldability together superior heat and corrosion resistance. As larger amounts of alloying elements are added, it becomes suitable for the welding of dissimilar joints where dilution from ferrite steel takes place.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
590 N/mm2 40% 50 J / -20ºC |
|
Classification
|
| AWS |
A5.9 EC309L |
|
Description
|
|
SW-309LNS Cored is a metal type stainless steel flux cored wire for welding of 22%Cr-12%Ni steel, heat resistant cast steel and for the joining of chrome nickel clad steels to Cr-Mo steel or mild steel. This wire is designed for flat and horizontal fillet welding. Its weld metal contains ferrite in austenitic structure, it gives excellent weldability, good corrosion and heat resistance.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
590 N/mm2 45% 60 J / -20ºC |
|
Classification
|
| AWS |
A5.22 E309MoLT1-1/-4 |
|
Description
|
|
SW-309MoL Cored is designed for the welding of 22%Cr-12%Ni-2.5%Mo stainless steels. This wire has excellent crack resistance combined with good arc characteristics for the use of downhand and vertical up. Main uses are for the applications of resistance to heat and corrosion and for the joining of stainless steels to mild or low alloy steels.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
690 N/mm2 32% 40 J / -20ºC |
|
Classification
|
| AWS |
A5.22 E316LT1-1/-4 |
|
Description
|
|
SW-316L Cored is a flux cored wire for all position welding to be used with CO₂ or Argon + CO₂ mixed shielding gases. Due to ferrite contents in the weld metals austenitic structure, it has excellent crack resistance. SW-316L Cored is designed for the welding of low carbon 18%Cr-12%Ni-2% Mo stainless steels or for the welding of dissimilar joints of stainless steels.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
590 N/mm2 40% 50 J / -20ºC |
|
Classification
|
| AWS |
A5.22 E316LT1-1/-4 |
|
Description
|
|
SW-316LT is a titania type flux cored wire for all position welding with CO₂& Argon+CO₂mixed shielding gas. This wire is designed for cryogenic applications, 316L austenitic stainless steels. SW-316LT is also available to order as a variant with a controlled composition and low ferrite content, designed for cryogenic service. This is particularly relevant to attack by chloride solutions and sulphurous acid.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
540 N/mm2 44% 35 J / -196ºC |
|
Classification
|
| AWS |
A5.22 E317LT1-1/-4 |
|
Description
|
|
SW-317L Cored is a flux cored wire for all position welding to be used with CO₂or Argon + CO₂ mixed shielding gases. Due to ferrite contents in the weld metals austenitic structure, it has excellent crack resistance. SW-317L Cored is designed for the welding of low carbon 18%Cr-12%Ni-2% Mo and 19%Cr- 13%Ni- 3%Mo stainless steels.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
600 N/mm2 35% 40 J / -20ºC |
|
Classification
|
| AWS |
A5.22 E347T1-1/-4 |
|
Description
|
|
SW-347 Cored is a titania type flux cored wire designed for welding of 347 and 321 type stainless steels. Main uses are for the welding of stainless steel boilers and gas turbines.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
610 N/mm2 45% 60 J / -20ºC |
|
Classification
|
| AWS |
A5.22 E410NiMoT1-1/-4 |
|
Description
|
|
SW-410NiMo Cored is a flux cored wire for martensitic stainless steel like CA6NM. SW-410NiMo cored is a titania type flux cored wire for all position welding with CO₂ & Mixed gas. As deposition rate is higher than solid wire and MMA electrode, highly efficient welding can be performed. Arc stability is excellent, so spatter loss is low and slag covering is uniform with good removability.
|
|
Mechanical properties
|
| Yield strenght Elongation Tensile strenght Impact strenght |
710 N/mm2 20% 890 N/mm2 50 J / 0ºC |
|
Classification
|
| AWS |
A5.22 E2209T1-1/-4 |
|
Description
|
|
SW-2209 Cored is a titania type flux cored wire for all position welding with CO₂& Mixed gas. As deposition rate is higher than solid wire and MMA electrode highly efficient welding can be performed. SW-2209 Cored is an all positional flux cored wire for duplex stainless steels like 2205.
|
|
Mechanical properties
|
| Yield strenght Elongation Tensile strenght Impact strenght |
680 N/mm2 27% 820 N/mm2 50 J / -50ºC |
|
Classification
|
| AWS |
A5.22 E308LT0-1/-4 |
|
Description
|
|
Supercored 308L is designed for use in petrochemical processing, textile industries and can be used for welding 18%Cr-8%Ni stainless steels. Supercored 308L for welding stainless steels has a rapid solidifying slag which enables flat and horizontal position welding. It gives a stable arc and low spatter.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
600 N/mm2 43% 60 J / -20ºC |
|
Classification
|
| AWS |
A5.22 E309LT0-1/-4 |
|
Description
|
|
Supercored 309L is designed for the welding of dissimilar metals such as stainless steels and carbon steels or stainless steels and low alloy steels. Supercored 309L which contains a high ferrite level in its austenitic structure has excellent heat and corrosion resistibility. It has a good stable arc and excellent slag removal properties.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
600 N/mm2 35% 50 J / -20ºC |
|
Classification
|
| AWS |
A5.22 E309MoLT0-1/-4 |
|
Description
|
|
Supercored 309MoL is designed for applications of resistance to corrosion and for the joining of stainless to mild or low alloy steels. Supercored 309MoL which contains a high ferrite level in austenitic has excellent heat, corrosion and crack resistibility. It has a good stable arc and excellent slag removal properties.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
600 N/mm2 35% 50 J / -20ºC |
|
Classification
|
| AWS |
A5.22 E316LT0-1/-4 |
|
Description
|
|
Supercored 316L is designed for the welding of low carbon 18%Cr-12%Ni-2%Mo stainless steels or for the welding of dissimilar joints of stainless steels. Supercored 316L gives good arc stability and easy slag removal due to its low carbon content. It has excellent resistance against granular corrosion.
|
|
Mechanical properties
|
| Tensile strenght Elongation Impact strenght |
590 N/mm2 40% 50 J / -20ºC |
|
Classification
|
| AWS |
A5.9 EC409 |
|
Description
|
|
SF-409Ti is a metal type flux cored wire designed for the horizontal fillet welding of AISI 409 ferrite stainless steels. This wire has been specifically formulated for use in the welding of automotive exhaust systems and mufflers. It benefits from being spatter free and without slag formation when used with argon or argon oxygen mixed shielding gas. It also has an excellent deposition rate and corrosion resistance. High speed welding can be carried out with this product on thin plate material without burning through. SF-409Ti can be used in the welding of similar chemical composition alloys.
|
|
Mechanical properties
|
| Tensile strenght Elongation |
500 N/mm2 20% |
|
Classification
|
| AWS |
A5.9 EC430 |
|
Description
|
|
SF-430 is a metal cored wire for horizontal, fillet and flat position welding of 409 and 430 type stainless steels as found in ferrite stainless steels automotive mufflers. This wire gives excellent bead appearance and provides the operator with a soft stable arc and very low spatter levels thus giving enhanced cosmetic appearance.
|
|
Mechanical properties
|
| Tensile strenght Elongation |
500 N/mm2 40% |
|
Description
|
|
SF-436 is a metal cored wire for horizontal, fillet and flat position welding of 409,430 and 436 type stainless steels as found in ferrite stainless steels automotive mufflers. This wire gives excellent bead appearance and provides the operator with a soft stable arc and very low spatter levels thus giving enhanced cosmetic appearance.
|
|
Mechanical properties
|
| Tensile strenght Elongation |
500 N/mm2 35% |
|
Description
|
|
SC-439Ti Cored is a meted wire designed for flat and horizontal fillet welding of AISI 439 ferrite stainless steels. This wire has specifically formulated for use in the welding of automotive exhaust systems and mufflers. It benefits from being spatter free and without slag formation when used in conjunction with argon or argon oxygen mixed shielding gas. It also has an excellent deposition rate and corrosion resistance. High speed welding can be carried out with this product on thin plate material without burning through. SC-439Ti Cored can used in the welding of similar chemical composition alloys.
|
|
Mechanical properties
|
| Tensile strenght Elongation |
500 N/mm2 40% |
© Copyright - Lascentrum Ridderkerk - 2004
|
|
|
Startpagina
3M Scotch Brite
Gevulde lasdraden.gif){kind=small}