| |
HYUNDAI GEVULDE LASDRADEN VOOR ONGELEGEERD STAAL
| Classification: |
| AWS |
A5.20 E 71T-1C |
| Description: |
| Supercored 71 is a flux cored wire which has been designed to get a good usability in all position for wide range of welding currents. With its quiet and smooth arc, its slag detachability is very good. |
| Mechanical properties: |
| Yield strenght |
548 N/mm2 |
| Elongation |
28% |
| Tensile strenght |
582 N/mm2 |
| Impact strenght |
86 J / 0ºC |
| Classification: |
| AWS |
A5.20 E71T-1C/-9C/-9C-J |
| Description: |
| Supercored 71H is a titania flux cored wire for all position welding with high amperage. Its impact value is very good under high heat-input, arc is smooth and slag detachability is excellent. |
| Mechanical properties: |
| Yield strenght |
550 N/mm2 |
| Elongation |
27% |
| Tensile strenght |
570 N/mm2 |
| Impact strenght |
60 J / -40ºC |
| Classification: |
| AWS |
A5.20 E71T-1M/-9M |
| Description: |
| Supercored 71MAG is a flux cored wire which has been designed to get a good usability in all position for wide range of welding currents. With its quiet and smooth arc, its slag detachability is very good. |
| Mechanical properties: |
| Yield strenght |
580 N/mm2 |
| Elongation |
28% |
| Tensile strenght |
600 N/mm2 |
| Impact strenght |
60 J / -30ºC |
| Classification: |
| AWS |
A5.20 E71T-1M/-9M |
| Description: |
| SC-71LHM Cored is a titania type flux cored wire for all position welding. It has extra low hydrogen level(H5) and provides an exceptionally smooth and stable arc with a fast freezing slag system. |
| Mechanical properties: |
| Yield strenght |
580 N/mm2 |
| Elongation |
28% |
| Tensile strenght |
600 N/mm2 |
| Impact strenght |
80 J / -30ºC |
| Classification: |
| AWS |
A5.20 E70T-1C/-9C |
| Description: |
| SC-70H Cored is a flux cored wire for Flat & H-fillet efficient welding with CO2 shielding gas. As deposition rate is very high, highly efficient welding can be performed. Weld metal has good impact properties at -30°C (-22°F) Slag is uniform and easy to remove. |
| Mechanical properties: |
| Yield strenght |
495 N/mm2 |
| Elongation |
27% |
| Tensile strenght |
580 N/mm2 |
| Impact strenght |
51 J / -30ºC |
| Classification: |
| AWS |
A5.20 E70T-1C |
| Description: |
| Supercored 70MXH is a metal cored wire for high speed single or twin tandem welding application in the flat and horizontal fillet position. This wire benefits from high deposition rate and is widely used for shipbuilding, construction of bridge, and structural fabrication. |
| Mechanical properties: |
| Yield strenght |
540 N/mm2 |
| Elongation |
28% |
| Tensile strenght |
620 N/mm2 |
| Impact strenght |
60 J / -20ºC |
| Classification: |
| AWS |
A5.18 E70C-3C/-6M |
| Description: |
| SC-70T Cored is ideally suitable for thin plate welding and root pass welding of structural steel. Designed for high productivity and automatic applications where a large amount of filler metal can be deposited with a minimum amount of slag & spatter. Typical industrial applications include shipbuilding, machinery, bridge construction and structural fabrication. |
| Mechanical properties: |
| Yield strenght |
520 N/mm2 |
| Elongation |
27% |
| Tensile strenght |
590 N/mm2 |
| Impact strenght |
45 J / -20ºC |
| Classification: |
| AWS |
A5.18 E70C-G |
| Description: |
| SC-70Z Cored is designed for the welding of low carbon and low alloy galvanized steel sheets as well as vertical-up position welding of galvanized pipe line at relatively high weld rates. It has the high deposition rates due to the higher feedability than a solid wire. Applicable to the zinc plating weight less than 60g/m2 generally. |
| Mechanical properties: |
| Yield strenght |
580 N/mm2 |
| Elongation |
25% |
| Tensile strenght |
640 N/mm2 |
| Impact strenght |
105 J / 0ºC |
| Classification: |
| AWS |
A5.18 E70C-6M |
| Description: |
| Supercored 70NS is a metal-cored wire which combines the high deposition rates of FCW with the high efficiencies of a solid wire, provides exceptionally smooth and stable arc, low spatter and minimal slag coverage. |
| Mechanical properties: |
| Yield strenght |
440 N/mm2 |
| Elongation |
27% |
| Tensile strenght |
519 N/mm2 |
| Impact strenght |
50 J / -30ºC |
| Classification: |
| AWS |
A5.20 E71T-5C |
| Description: |
| Supercored 70SB is a basic flux cored wire with excellent characteristics and is suitable for steel with a tensile strength up to 600N/mm². Deposited metal shows superior crack resistance, excellent at low temperature at -20~-30°C(-4~-22°F). |
| Mechanical properties: |
| Yield strenght |
570 N/mm2 |
| Elongation |
26% |
| Tensile strenght |
620 N/mm2 |
| Impact strenght |
70 J / -30ºC |
© Copyright - Lascentrum Ridderkerk - 2004
|
|
|
Startpagina
3M Scotch Brite
Gevulde lasdraden