| |
HYUNDAI GEVULDE LASDRADEN VOOR HITTEBESTENDIG STAAL
| Classification: |
| AWS |
A5.29 E81T1-B2C |
| Description: |
| SC-81B2 can be used for welding of 1.25%Cr-0.5%Mo heat resistant steels used for steam pipes of boilers for electric power plants and marine use, equipment for oil refining industries and high temperature synthetic chemical industries. Most common usage is in steam power plants and ships, chemical plants and refineries. |
| Mechanical properties: |
| Yield strenght |
575 N/mm2 |
| Elongation |
22% |
| Tensile strenght |
656 N/mm2 |
| P.W.H.T. |
690 ± 15ºC x 1hr |
| Classification: |
| AWS |
A5.29 E91T1-B3C |
| Description: |
| SC-91B3 can be used for welding of 2.25%Cr-1.0%Mo steel used for super heat tubes and steam pipes of boilers for electric power plant and marine use, equipment for oil refining industries and high temperature synthetic chemical industries. |
| Mechanical properties: |
| Yield strenght |
643 N/mm2 |
| Elongation |
20% |
| Tensile strenght |
730 N/mm2 |
| P.W.H.T. |
690 ± 15ºC x 1hr |
| Classification: |
| AWS |
A5.28 E80C-G |
| Description: |
| SC-80D2 is a metal-cored gas shielded cored wire which combines the high deposition rates of a flux cored wire with the high efficiencies of a solid wire. SC-80D2 is equivalent to ER80S-D2 solid wire. It provides an exceptionally smooth and stable arc, low spatter and minimal slag coverage. |
| Mechanical properties: |
| Yield strenght |
590 N/mm2 70 J / -20ºC |
| Elongation |
28% |
| Tensile strenght |
660 N/mm2 |
| Impact strenght |
70 J / -20ºC |
| Classification: |
| AWS |
A5.28 E80C-G |
| Supercored 1CM can be used on 1.25%Cr-0.5%Mo steels. Recommended for welding of steam boiler plates and high temperature steels. |
| Mechanical properties: |
| Yield strenght |
510 N/mm2 |
| Elongation |
25% |
| Tensile strenght |
600 N/mm2 |
| Impact strenght |
110 J / 0ºC (620/8hr) |
© Copyright - Lascentrum Ridderkerk - 2004
|
|
|
Startpagina
3M Scotch Brite
Gevulde lasdraden