| |
HYUNDAI SAW WIRE & FLUX FOR HARDFACING APPLICATIONS
| Description: |
| For Low/Middle alloy type metal-metal wear-resistance (Crane Wheel, Rod Wheel, Tractor Roller etc.) |
| Mechanical properties: |
| Hardness |
28 - 32 HRc |
| Description: |
| Build up or Hardfacing on the part which does not have much alloy elements. (Crane & Mine Car Wheels) |
| Mechanical properties: |
| Hardness |
40 - 45 HRc |
| Description: |
| For Middle alloy type metal-metal wear-resistance (Crane Wheel, Rod Wheel, Tractor Roller etc.) |
| Mechanical properties: |
| Hardness |
46 - 50 HRc |
| Description: |
| For the hardfacing of Steel mill table roll as Martensite alloy (Steel Mill Rolls - required to get high hardness and abrasion resistance) |
| Mechanical properties: |
| Hardness |
50 - 55 HRc |
| Description: |
| Good at defect-resistance and weldability etc. by shielding weld metal with flux from defects. (Steel Mill Rolls, Casting Rolls) |
| Mechanical properties: |
| Hardness |
34 - 38 HRc |
| Description: |
| Good at defect-resistance and weldability etc. by shielding weld metal with flux from defects. (Steel Mill Rolls, Casting Rolls) |
| Mechanical properties: |
| Hardness |
40 - 45 HRc |
| Description: |
| Good at defect-resistance and weldability etc. by shielding weld metal with flux from defects. (Steel Mill Rolls, Casting Rolls) |
| Mechanical properties: |
| Hardness |
48 - 52 HRc |
| Description: |
| Good at defect-resistance and weldability etc. by shielding weld metal with flux from defects. (Steel Mill Rolls, Casting Rolls) |
| Mechanical properties: |
| Hardness |
48 - 52 HRc |
| Classification: |
| AWS |
A5.23 F8P2-ECA4-A4 |
| Description: |
| For High strength TMCP or Creep-resistance steels (Creep-resistance steels, Fine-grained steels) |
| Mechanical properties: |
| Yield strenght |
610 N/mm2 |
| Elongation |
24% |
| Tensile strenght |
676 N/mm2 |
| Impact strenght |
70 J / -29ºC |
© Copyright - Lascentrum Ridderkerk - 2004
|
|
|
Homepage
3M Safety
SAW Wire & Flux