


> Electrode ovens	dinsdag, januari 6, 2009

ELECTRODE OVEN

ELECTRODE QUIVER HP 2

With its capacity of 2 parcels the HP 2 is a welding rod box which is utmost suitable for use on the job. Due to its very small weight and skilful strap the HP 2 can easily be taken to the place of welding . This way cooling down of the welding rods is avoided, thus improving the quality of welding.

Technical specification
Capacity	2 parcels
Elec. supply and load	230V / 115V AC/DC 200 Watt
Internal measurements	90 x 125 x 460mm
External measurements	170 x 190 x 500mm
Net weight	9,0 kg
Gross weight	9,5 kg

Electrode oven HP 2.jpg

ELECTRODE OVEN HP 4

The HP 4 is -just like the HP 2 - very suitable for use on site. The removable holder has a capacity of 4-6 parcels. The HP 4 has an adjustable temperature between 50 - 300°C.

Technical specification
Temperature	50 - 300°C
Capacity	4 - 6 parcels
Elec. supply and load	230V / 115V AC-500 Watt
Internal measurements	165 x 165 x 470mm
External measurements	300 x 250 x 560mm
Net weight	16,0 kg
Gross weight	16,5 kg

Electrode oven HP 4.jpg

ELECTRODE OVEN EDR 40

For small workshops, for welding cabins, etc. the EDR 40 with its capacity of 20 - 30 parcels is very handy. In the so-called static cabinets the silicagel cartridges will keep the relative humidity below 40% without temperature increase. The silicagel adsorbs the humidity of the air in the cabinet. When saturated the silicagel colour changes from blue to pink. It is necessary at this stage to take the cartridges out of the cabinet. By heating the cartridges the adsorbed humidity will be removed and the cartridge can be used again.

Technical specification
Capacity	20 - 30 parcels
Elec. supply and load	230V / 100 Watt
Internal measurements	490 x 300 x 350mm
External measurements	510 x 530 x 440mm
Net weight	14,5 kg
Gross weight	16,0 kg

Electrode oven EDR 40.jpg

WELDING FLUX OVEN LPD 100

It is a well-known fact that welding powder, exposed to humidity, may cause faulty welds when used. Proper use of the LPD 100 will help the industry to meet the requirement and improve quality. A thermostat allows for setting of a temperature from 50 - 300°C. The LPD 100 is rainproof and the cabinet is provided with 50mm mineral wool insulation.

Technical specification
Temperature	50 - 300°C
Capacity	100 kg
Elec. supply and voltage	230V / 50Hz / 2,5Kw
Internal measurements	420 x 420 x 650mm
External measurements	650 x 530 x 1130mm
Net weight	75 kg
Gross weight	96 kg

Flux oven LPD 100.jpg

ELECTRODE OVEN ED 120 TC

The ED 120 TC is an industrial oven with a double-walled construction with insulation. This solid and functional construction guarantees a long life time. The oven is delivered with a temperature controller up to 120°C.

Technical specification
Temperature	50 - 120°C
Capacity	± 35 parcels
Elec. supply and voltage	230V / 50-60Hz / 650 Watt
Internal measurements	500 x 400 x 625mm
External measurements	600 x 500 x 880mm
Net weight	62 kg
Gross weight	84 kg

Electrode oven ED 120 TC.jpg

ELECTRODE OVEN ED 300 TC

The ED 300 TC cabinet has a capacity of approx. 72 parcels and is easily accessible. When the parcels are heated the welding rods remain dry and of factory quality.

Technical specification
Temperature	50 - 300°C
Capacity	54 - 72 parcels
Elec. supply and voltage	230 / 400V / 50/60Hz / 3300 Watt
Internal measurements	700 x 450 x 1060mm
External measurements	820 x 600 x 1300mm
Net weight	131 kg
Gross weight	152 kg

Electrode oven ED 300 TC.jpg

ELECTRODE OVEN ED 400 TTCC

This programmable drying oven ED 400 TTCC is especially designed for baking, drying and subsequently storing welding rods at a lower (pre-selected) holding temperature. For this reason we installed 2 temperature controllers (high and low) and a 0 - 30 Hr timer.

Technical specification
Temperature high	50 - 400°C
Temperature low	50 - 300°C
Capacity	± 125 kg
Elec. supply and load	230V / 50Hz / 2000 Watt
Internal measurements	500 x 400 x 525mm
External measurements	730 x 760 x 920mm
Net weight	90 kg
Gross weight	110 kg

Electrode oven ED 400 TTCC.jpg

ELECTRODE OVEN ED 1500 T

This drying oven with its capacity up to 800 parcels is electrically heated with a temperature that exceeds the environment temperature by approx 32ºC.

Technical specification
Temperature	± 32°C
Capacity	600 - 800 parcels
Elec. supply and load	230V / 1000 Watt
Internal measurements	600 x 1600 x 1560mm
External measurements	750 x 1605 x 1660mm
Net weight	230 kg
Gross weight	246 kg

Electrode oven 1500 T.jpg